Toyota 2007 Yaris Sedan Owner'S Manual Download Page 79

Page: 79 / 299

2007 YARIS SEDAN from Oct. ’06 Prod. (OM52736U)

US13022

Do not install a child restraint sys-
tem on the rear seat if it interferes

with the lock mechanism of the

front seats. Otherwise, the child or
front seat occupant(s) may be killed

or seriously injured in case of sud-

den braking or a collision.

If the driver’s seat position does

not allow sufficient space for safe

installation, install the child re-
straint system on the rear right

seat.

US13111a

Upright

Split seat: When installing a child
restraint system in the rear seat

center position, return both the left

and right seatbacks to the upright
position. Otherwise, the child re-

straint system cannot be securely

restrained and this may cause death
or serious injuries in a collision.

US13023

1. Run the lap and shoulder belt through

or around the infant seat following the
instructions provided by its manufactur-

er and insert the tab into the buckle

taking care not to twist the belt. Keep
the lap portion of the belt tight.

06 09.07

Summary of Contents for 2007 Yaris Sedan












































































































































































































































































































Search results

Summary of Contents for 2007 Yaris Sedan

Reviews:

Brands by name

Popular brands

Toyota 2007 Yaris Sedan, Owner'S Manual

Search results

Summary of Contents for 2007 Yaris Sedan

Reviews:

Brands by name

Popular brands