Toyota 2007 Yaris Sedan Owner'S Manual Download Page 263

Page: 263 / 299

255

2007 YARIS SEDAN from Oct. ’06 Prod. (OM52736U)

Positioning the jack

US71005

Front of

vehicle

Do not jack up

Lower

back outer

panel

(protrusion)

When jacking up your vehicle with the

jack, position the jack correctly as
shown in the illustration.

Jack position . . . . . . . . . . . . . . . . . . . .

Front—Front suspension member
Rear—Lower back outer panel

Support position for
Pantograph jack . . . . . . . . . . . . . . . . .

CAUTION

When jacking, be sure to observe the
following to reduce the possibility of

death or serious injury:

Follow jacking instructions.

Do not put any part of your body

under the vehicle supported by a
jack. Otherwise, personal injury may

occur.

Do not start or run the engine while
your vehicle is supported by the

jack.

Stop the vehicle on a level firm

ground, firmly set the parking brake

and put the transmission in “P”
(automatic) or reverse (manual).

Block the wheels on the opposite

side of the jack up point if neces-
sary.

Make sure to set the jack properly
in the jack point. Raising the ve-

hicle with jack improperly posi-

tioned will damage the vehicle or
may allow the vehicle to fall off the

jack and cause personal injury.

Never get under the vehicle when
the vehicle is supported by the jack

alone; use vehicle support stands.

Do not raise the vehicle with some-
one in the vehicle.

When raising the vehicle, do not
place any objects on top of or un-

derneath the jack.

NOTICE

Make sure to place the jack correctly,
or your vehicle may be damaged.

06 09.07

Summary of Contents for 2007 Yaris Sedan












































































































































































































































































































Search results

Summary of Contents for 2007 Yaris Sedan

Reviews:

Brands by name

Popular brands

Toyota 2007 Yaris Sedan, Owner'S Manual

Search results

Summary of Contents for 2007 Yaris Sedan

Reviews:

Brands by name

Popular brands