Toyota 2007 Yaris Sedan Owner'S Manual Download Page 261

Page: 261 / 299

253

2007 YARIS SEDAN from Oct. ’06 Prod. (OM52736U)

Dispose of used oil and filter only
in a safe and acceptable manner.

Do not dispose of used oil and fil-

ter in household trash, in sewers or
onto the ground. Call your dealer or

a service station for information

concerning recycling or disposal.

Take care when filling the brake and

clutch fluid reservoirs because

brake fluid can harm your eyes and
damage painted surfaces. If fluid

gets in your eyes, flush your eyes

with clean water immediately. If you
still feel uncomfortable with your

eyes, go to the doctor.

NOTICE

Remember that battery and ignition
cables carry high currents or volt-

ages. Be careful of accidentally

causing a short circuit.

Add only “Toyota Super Long Life

Coolant” or similar high quality eth-

ylene glycol based non

−

silicate,

non

−

amine, non

−

nitrite, and non

−

bo-

rate coolant with long

−

life hybrid

organic acid technology to fill the
radiator. “Toyota Super Long Life

Coolant” is a mixture of 50% cool-

ant and 50% deionized water (for
the U.S.A.) or 55% coolant and 45%

deionized water (for Canada).

If you spill some of the coolant, be

sure to wash it off with water to

prevent it from damaging the parts
or paint.

Do not allow dirt or anything else
to fall through the spark plugholes.

Use only spark plugs of the speci-

fied type. Using other types will
cause engine damage, loss of per-

formance or radio noise.

Do not reuse iridium

−

tipped spark

plugs by cleaning or regapping.

Do not overfill automatic transmis-

sion fluid, or the transmission
could be damaged.

Do not drive with the air cleaner
filter removed, or excessive engine

wear could result. Also backfiring

could cause a fire in the engine
compartment.

Be careful not to scratch the glass

surface with the wiper frame.

When closing the engine hood,

check to see that you have not for-
gotten any tools, rags, etc.

06 09.07

Summary of Contents for 2007 Yaris Sedan












































































































































































































































































































Search results

Summary of Contents for 2007 Yaris Sedan

Reviews:

Brands by name

Popular brands

Toyota 2007 Yaris Sedan, Owner'S Manual

Search results

Summary of Contents for 2007 Yaris Sedan

Reviews:

Brands by name

Popular brands