Toyota 2007 Yaris Sedan Owner'S Manual Download Page 225

Page: 225 / 299

217

2007 YARIS SEDAN from Oct. ’06 Prod. (OM52736U)

5. Charge the discharged battery with the

jumper cables connected for approxi-

mately 5 minutes. At this time, run the
engine in the vehicle with the booster

battery at about 2000 rpm with the ac-

celerator pedal lightly depressed.

6. Start your engine in the normal way.

After starting, run it at about 2000 rpm

for several minutes with the accelerator
pedal lightly depressed.

7. Carefully disconnect the cables in the

exact reverse order: the negative cable

and then the positive cable.

8. Carefully dispose of the battery cover

cloths—they may now contain sulfuric

acid.

9. If removed, replace all the battery vent

plugs.

If the cause of your battery discharging is

not apparent (for example, lights left on),

you should have it checked at your Toyota
dealer.

If the first start attempt is not success-

ful...

Check that the clamp on the jumper

cables are tight. Recharge the discharged
battery with the jumper cables connected

for several minutes and restart your en-

gine in the normal way.

If another attempt is not successful, the

battery may be depleted. Have it checked

at your Toyota dealer.

If your engine stalls while driving...

1. Reduce your speed gradually, keeping

a straight line. Move cautiously off the
road to a safe place.

2. Turn on your emergency flashers.
3. Turn the ignition key to “ACC” or

“LOCK”, and try starting the engine

again.

If the engine will not start, see “If your

vehicle will not start” in this Section.

CAUTION

If the engine is not running, the pow-
er assist for the brakes and steering

will not work so steering and braking

will be much harder than usual.

06 09.07

If your engine stalls while

driving

Summary of Contents for 2007 Yaris Sedan












































































































































































































































































































Search results

Summary of Contents for 2007 Yaris Sedan

Reviews:

Brands by name

Popular brands

Toyota 2007 Yaris Sedan, Owner'S Manual

Search results

Summary of Contents for 2007 Yaris Sedan

Reviews:

Brands by name

Popular brands