Toyota 2007 Yaris Sedan Owner'S Manual Download Page 88

Page: 88 / 299

2007 YARIS SEDAN from Oct. ’06 Prod. (OM52736U)

US13038a

Move seat

fully back

CAUTION

A forward

−

facing child restraint sys-

tem should be allowed to be

installed on the front passenger

seat only when it is unavoidable.
Always move the seat as far back

as possible even if the “AIRBAG

OFF” indicator light is illuminated,
because the front passenger airbag

could

inflate with considerable

speed and force. Otherwise, the
child may be killed or seriously in-

jured.

On vehicles with side airbags and
curtain shield airbags, do not allow

the child to lean his/her head or

any part of his/her body against the
door or the area of the seat, front

or rear pillar or roof side rail from

which the side airbags or curtain
shield airbags deploy even if the

child is seated in the child restraint

system. It is dangerous if the side
airbag and curtain shield airbag in-

flate, and the impact could cause

death or serious injury to the child.

US13113

Upright

Split seat: When installing a child
restraint system in the rear seat

center position, return both the left

and right seatbacks to the upright
position. Otherwise, the child re-

straint system cannot be securely

restrained and this may cause death
or serious injuries in a collision.

06 09.07

Summary of Contents for 2007 Yaris Sedan












































































































































































































































































































Search results

Summary of Contents for 2007 Yaris Sedan

Reviews:

Related manuals for 2007 Yaris Sedan

Brands by name

Popular brands

Toyota 2007 Yaris Sedan, Owner'S Manual

Search results

Summary of Contents for 2007 Yaris Sedan

Reviews:

Related manuals for 2007 Yaris Sedan

Brands by name

Popular brands