Toyota 2007 Yaris Sedan Owner'S Manual Download Page 231

Page: 231 / 299

223

2007 YARIS SEDAN from Oct. ’06 Prod. (OM52736U)

US41010

To remove the spare tire, loosen the

bolt and remove it.
Then take the spare tire out of the

vehicle.
When storing the spare tire, put it in

place with the inner side of the wheel

facing up. Then secure the tire by re-

peating the above removal steps in

reverse order to prevent it from flying

forward during a collision or sudden

braking.

—Blocking the wheel

US41001

2. Block the wheel diagonally op-

posite the flat tire to keep the

vehicle from rolling when it is

jacked up.

When blocking the wheel, place a

wheel block in front of one of the front

wheels or behind one of the rear

wheels.

PS41507

Steel wheels

3. Remove the wheel ornament.

Pry off the wheel ornament, using the

beveled end of the wheel nut wrench

as shown.

CAUTION

Do not try to pull off the orna-

ment by hand. Take due care in

handling the ornament to avoid

unexpected personal injury.

06 09.07

—Removing wheel ornament

(on some models)

Summary of Contents for 2007 Yaris Sedan












































































































































































































































































































Search results

Summary of Contents for 2007 Yaris Sedan

Reviews:

Brands by name

Popular brands

Toyota 2007 Yaris Sedan, Owner'S Manual

Search results

Summary of Contents for 2007 Yaris Sedan

Reviews:

Brands by name

Popular brands