Toyota 2007 Yaris Sedan Owner'S Manual Download Page 237

Page: 237 / 299

229

2007 YARIS SEDAN from Oct. ’06 Prod. (OM52736U)

If your vehicle becomes stuck in snow,

mud, sand, etc., then you may attempt

to rock the vehicle free by moving it
forward and backward.

CAUTION

Do not attempt to rock the vehicle
free by moving it forward and back-

ward if people or objects are any

where near the vehicle. During the
rocking operation the vehicle may

suddenly move forward or backward

as it becomes unstuck, causing injury
or damage to nearby people or ob-

jects.

NOTICE

If you rock your vehicle, observe the
following precautions to prevent dam-

age to the transmission and other

parts.

Do not depress the accelerator ped-

al while shifting the selector lever

or before the transmission is com-
pletely shifted to forward or reverse

gear.

Do not race the engine and avoid

spinning the wheels.

If your vehicle remains stuck after
rocking the vehicle several times,

consider other ways such as tow-
ing.

US41002

(a) Towing with wheel lift type truck—

—From front

—From rear

(b) Using flat bed truck

06 09.07

If your vehicle becomes stuck

If your vehicle needs to be

towed—

Summary of Contents for 2007 Yaris Sedan












































































































































































































































































































Search results

Summary of Contents for 2007 Yaris Sedan

Reviews:

Brands by name

Popular brands

Toyota 2007 Yaris Sedan, Owner'S Manual

Search results

Summary of Contents for 2007 Yaris Sedan

Reviews:

Brands by name

Popular brands