Toyota 2007 Yaris Sedan Owner'S Manual Download Page 215

Page: 215 / 299

207

2007 YARIS SEDAN from Oct. ’06 Prod. (OM52736U)

SY31001a

Total trailer weight

Tongue load

X 100 = 9 to 11%

Tongue load

Total trailer weight

The trailer cargo load should be
distributed so that the tongue load

is 9 to 11% of the total trailer

weight, not exceeding the maximum
of 32 kg (70 lb.). Never load the

trailer with more weight in the back

than in the front. About 60% of the
trailer load should be in the front

half of the trailer and the remaining

40% in the rear.

HITCHES

Use only a hitch (Toyota genuine hitch

or equivalent) which is recommended
by the hitch manufacturer and conforms

to the total trailer weight requirement.

Follow the directions supplied by the

hitch manufacturer. Lubricate the hitch

ball with a light coat of grease.

Toyota recommends removing the trail-

er hitch whenever you are not towing

a trailer to reduce the possibility of
additional damage caused by the hitch

if your vehicle is struck from behind.

NOTICE

Do not use axle

−

mounted hitches as

they can cause damage to the axle

housing, wheel bearings, wheels or

tires. Also, never install a hitch which
may interfere with the normal function

of an Energy Absorbing Bumper, if so

equipped.

BRAKE AND SAFETY CHAINS

Toyota recommends trailers with

brakes that conform to any applica-

ble federal and state/provincial regu-
lations.

A safety chain must always be used

between the towing vehicle and the

trailer. Leave sufficient slack in the
chain for turns. The chain should

cross under the trailer tongue to

prevent the tongue from dropping to
the ground in case it becomes dam-

aged or separated. For correct safety

chain procedures, follow the hitch or
trailer manufacturer’s recommenda-

tion.

CAUTION

Never tap into your vehicle’s hy-
draulic system as it would lower its

braking effectiveness.

Never tow a trailer without using a
safety chain securely attached to

both the trailer and the vehicle. If

damage occurs to the coupling unit
or hitch ball, there is danger of the

trailer wandering over into another

lane.

06 09.07

Summary of Contents for 2007 Yaris Sedan












































































































































































































































































































Search results

Summary of Contents for 2007 Yaris Sedan

Reviews:

Related manuals for 2007 Yaris Sedan

Brands by name

Popular brands

Toyota 2007 Yaris Sedan, Owner'S Manual

Search results

Summary of Contents for 2007 Yaris Sedan

Reviews:

Related manuals for 2007 Yaris Sedan

Brands by name

Popular brands