Toyota 2007 Yaris Sedan Owner'S Manual Download Page 241

Page: 241 / 299

233

2007 YARIS SEDAN from Oct. ’06 Prod. (OM52736U)

US41007

2. Use the towing eyelet in the tool bag.

Secure the front towing eyelet to the
hole on the front bumper by turning

clockwise. (For the tool bag storage

location, see “—Required tools and
spare tire” on page 222.)

US41008

3. Tighten the front towing eyelet securely

by a wheel nut wrench.

CAUTION

When installing the eyelet on the ve-
hicle, be sure to tighten the front

eyelet securely. If the eyelet is loose,

it may come off when being towed
and result in death or serious injury.

US41013

If you cannot shift the selector lever

out of “P” position to other positions
even though the brake pedal is de-

pressed, use the shift lock override but-

ton as follows:

1. Turn the ignition key to “ACC” or

“LOCK” position. Make sure the
parking brake is applied.

2. Pry up the cover with a flathead

screwdriver or equivalent.

06 09.07

If you cannot shift automatic

transmission selector lever

Summary of Contents for 2007 Yaris Sedan












































































































































































































































































































Search results

Summary of Contents for 2007 Yaris Sedan

Reviews:

Brands by name

Popular brands

Toyota 2007 Yaris Sedan, Owner'S Manual

Search results

Summary of Contents for 2007 Yaris Sedan

Reviews:

Brands by name

Popular brands