- 8 -
tousek
/ EN_ST-80-M-S_05 / 25. 03. 2020
•
The program menu of MASTER control is divided into “BASIC SETTINGS” and “MENU CONTROL”
•
The program menu of Slave-control has only the “MENU CONTROL” (=MAIN MENU).
•
Before starting the programming, please choose the language. Use the buttons
+
or
-
to choose menu langu-
age and confirm with
.
•
language adjustment has to be made in Master- and Slave control .
•
Note: Language selection can also be chosen by pressing the ESC button ( ) for 5s, from any position in menu..
Programming buttons
Adjustments - overview
• For programming please remove cover
(A)
of control
device (loosen 2 bolts).
• The text display
(T)
informs you ou about operating status,
chosen menus and the adjustment of various parameters..
• The programming of the control is carried out with the help
of four buttons
(
+, -
,
(=Enter)
and
(=Escape).
• Scrolling through the available menu points (up/
down) or the adjustment of a parameter (value in-
crease/decrease) is carried out with b and –..
AUTO-COUNT:
when holding one of the buttons the value
changes automatically.
• When pressing the
-
button ea confirmation for entering the shown menu point, resp. for accepting the shown value
of a parameter is given.
• When pressing the
-
button you return to the superior menu point. Possibly changed adjustments of a parameter are
rejected with this button (the former values will remain).
•
AUTO-EXIT:
if no button is pressed during 1 min. then the menu switches automatically to the “ready” menu (wihtout
saving changed parameters).
3. Adjustments - overview
Barrier control ST 80, ST 80V / Master-Slave
The different menu points are indicated as follows:
= selectable setting
= factory settings
= status display
G
shows the menu points which are in the “ BASIC SETTINGS”
Programming menu
Adjustment - overview
Textdisplay
ESC
ENTER
BASIC SETTINGS
•
When entering the programming of the control unit for the first time you will see the BASIC SETTINGS
• Here the necessary adjustments which are necessary for the use of the operator/barrier can be set quickly.
• For advanced settings/programming please choose the menu point “menu (control)” (=Main Menu).
MENU CONTROL (= MAIN MENU)
• For futher programming you will reach immediatly the MENU (CONTROL)
(Basis settings are skipped)
• The menu control includes all kinds of settings, while in the slave control only parts of (
page 9) in the menu struc-
ture described menu items can be selected (marked
“M/S”
). .
All other functions are being taken over from the Master control board!
Summary of Contents for ST 80
Page 27: ......
