- 6 -
tousek
/ EN_ST-80-M-S_05 / 25. 03. 2020
24V a.c., max. 0,3A
for accessories
• During connection, adjustment and maintenance works please take care, that the electronic circuit
board won´t be damaged by moisture (rain).
Warning
•
Before taking off the control cover, the
mains switch must be turned off!
•
If the control is power supplied, its inner part is under tension.
•
In order to avoid electrical strokes, the safety regulations have to be
respected.
•
The device may only be connected by trained professionals.
•
The product is not suitable for installation in explosion-hazardous areas.
•
An all-pole disconnecting mains switch with a contact opening gap of
min. 3 mm has to be foreseen. The barrier facility has to be secured
according to the valid safety regulations!
•
IMPORTANT: The control lines (sensor, buttons, radio, photocells, etc.)
have to be laid separately from the 230V lines (supply line, motors,
signal lamp).
L N
boom lamp
24Vd.c.
magnetic clamp
24Vd.c.
grounding
230V
a.c.
Phase
50Hz
zero line
signal lamp 230V
max. 100W
41
42
43
44
45
46
50
52
31
37
32
30
33
30
34
30
54
20
21
22
23
80
81
0
1
2
10
11
L N
8.k2
contact edge main closing edge
70
71
74
75
9/1
9/2
9/3
9/4
78
79
– + – +
bridge
(must not be removed !)
barrier door contact
connection possibility
for motor condenser
(if not connected yet to the motor !)
Slave-control board
Terminal assignment
black (opening)
gray (blue)
brown (closing)
grounding
motor
connection
Summary of Contents for ST 80
Page 27: ......
