- 22 -
tousek
/ EN_ST-80-M-S_05 / 25. 03. 2020
$$$$$$$$$$$$$$$$
$$$$$$$$$$$$$$$$
photocell
$$$$$$$$$$$$$$$$
$$$$$$$$$$$$$$$$
Main safety edge
3
3
4
4
5
$$$$$$$$$$$$$$$$
$$$$$$$$$$$$$$$$
photocell
active
$$$$$$$$$$$$$$$$
$$$$$$$$$$$$$$$$
Main safety edge
active
$$$$$$$$$$$$$$$$
$$$$$$$$$$$$$$$$
photocell
not active
$$$$$$$$$$$$$$$$
$$$$$$$$$$$$$$$$
Main safety edge
not active
change ? YES
confirm
change ? YES
confirm
factory settings
$$$$$$$$$$$$$$$$
$$$$$$$$$$$$$$$$
Sprachauswahl:
Deutsch
$$$$$$$$$$$$$$$$
$$$$$$$$$$$$$$$$
Tousek Digital
2
1
2
3
$$$$$$$$$$$$$$$$
$$$$$$$$$$$$$$$$
Grundeinstellung
blättern
übernehmen
Bestätigung
LANGUAGE SELECTION for master control
•
Can be selected during initial operation (hence after reset to factory settings).
• Can be also chosen by pressing the
ESC button
( ) for 5s, from any position in menu.
Master control
M
Putting into operation
BASIC SETTING of Master-control
•
For setting the most important adjustments for initial operation of motor.
•
Can be selected during initial operation (hence when restoring the factory setting).
•
All safety devices are activated when leaving factory
(see menu page 9).
•
The next programming adjustments are made in the main settings menu
(see page 8,9).
The slave´s main menu includes only a part of the master´s menu items
(see Menu structure p.9).
These are
the items where for slave and master different operating parameters can be set. Otherwise the slave takes over
the operating parameters of the master.
Summary of Contents for ST 80
Page 27: ......
