- 16 -
tousek
/ EN_ST-80-M-S_05 / 25. 03. 2020
Tousek boom lamp kit
M/S
• The barrier can be equipped with a boom lamp kit
24Vd.c.,max. 5W,
consisting of 6 lamps.
•
Note:
The kit for round booms (Product No. 13710250) must be connected via a specially dimensioned series resistor
(R boom lamp)
to the control board ST 80 Master/Slave
(see figure),
the kit for flat booms (Art.Nr. 13710190)
without
a resistor.
Connection of boom lamp kit
•
ATTENTION: turn off power supply!
• When using the kit for round booms (Prod. No. 13710250)
slide the connecting cable of the boom lights into the ope-
ning of the protective resistor and fix it with Crimp wrench.
• Connect to
terminals 70/71
of the control ST 80 Master/
Slave.
70
71
74
75
9/1
9/2
9/3
9/4
78
79
R
boom lamp
fix
Light / Lamps
Connections and adjustments
Signal lamp
M/S
• A signal lamp
230V, max. 100W
can
be connected at terminals 10/11
of
Master and Slave board (the setting
is made via Master control)
Prewarning OPEN
(signal lamp: terminals
M/S
10/11)
M
Light/ lamps
turned off
1–30s adjustable:
Before each opening movement the
signal lamp/ flashing light is activated for the adjusted
time.
Prewarning CLOSE
(signal lamp: terminals
M/S
10/11)
M
turned off
1–30s adjustable:
Before each closing movement the
signal lamp/ flashing light is activated for the adjusted time.
10
11
Boom lamp CLOSE
(terminals 70 (-) / 71 (+))
M
Light / Lamps
• The boom lamp blinks during movement and stops blinking in open position.
• For the prewarning time the adjustments for the signal lamp are valid
• For closed position you can choose one of the following functions:
OFF
blinks:
boom lamp blinks in closed position
illuminates:
boom lamp illuminates in closed position
Danger
•
Before connection works or taking off the housing cover the power supply has to be turned off !
•
Please see safety rules!
(
page 5)
Forced closing (only ST 80V)
M
Operating logic
active:
this function causes that a manually released boom goes immediately back to closure.
not active:
the forced closing is deactivated
Summary of Contents for ST 80
Page 27: ......
