TotalFlow XRC6490, User Manual

Page: 163 / 342

A-47
Therms Master StreamTime String Registers
ARRAY.REGISTER DESCRIPTION TYPE
12.0 Current Stream 1 Time, String formatted.. Read
12.1 Current Stream 2Time, String formatted.. Read
12.2 Current Stream 3 Time, String formatted.. Read
12.3 Current Stream 4 Time, String formatted.. Read
Therms Master Slave Var Integer Registers
ARRAY.REGISTER DESCRIPTION TYPE
13.0 Slave Data Send Status. Read/Write
Note: For succeeding slaves the register offset for each slave = (slavenum * 1) + Index
Example: index register for slave data send status for slave 2 = (1 * 1) + 0
Therms Display String Registers
ARRAY.REGISTER DESCRIPTION TYPE
14.0
Analyzer Alarm, string based on value in App.15.17, 0 =
“Normal”, Not 0 = “Fault”
Read
14.1 Stream 1 Alarm, string based on value in App.15.24, 0 =
“Normal”, Not 0 = “Fault” Read
14.2 Stream 2 Alarm, string based on value in App.15.25, 0 =
“Normal”, Not 0 = “Fault” Read
14.3 Stream 3 Alarm, string based on value in app.15.26, 0 =
“Normal”, Not 0 = “Fault” Read
14.4 Stream 4 Alarm, string based on value in App.15.27, 0 =
“Normal”, Not 0 = “Fault” Read
14.5
Analyzer Mode, string based on value in App.1.59, 1 = “Hold”,
2 = “Run”, 3 = “SingleCycle”, 4 = “Abort”, 5 = “Calibrate”, 6 =
“StartUp”.
Read
14.6 Helium Psi, string based on value in App.15.11, 0 = “Normal”,
Not 0 = “Low” Read
14.7 Cal Psi, string based on value in App.15.12, 0 = “Normal”, Not
0 = “Low” Read
Therms Status Btu Integer Registers
ARRAY.REGISTER DESCRIPTION TYPE
15.0 Set Next State(3061) Read/Write
15.1 Auto Calibration during startup Read/Write
15.2 Auto Peak Detection during startup Read/Write
15.3 Auto Run after startup Read/Write
15.4 Number of Calibration cycles Read/Write
15.5 Number of Calibration cycles to Average Read/Write
15.6 Low Carrier Mode. Read/Write