2-12
AC Charging Unit Installation
The AC Power Charging Unit maintains a constant voltage charge on installed battery pack.
There are many different types and styles. Each unit will come with wiring instructions.
Generally, you should follow the steps listed below.
Materials
Supplied
The following hardware is required to mount the AC power charging unit
to XRC.
•
AC Charging Unit
•
Coupling
nipple
Materials Not
Supplied
•
Plastic cable ties
•
AC wiring, conduit (rigid or flexible)
To maintain system certification, all wiring must comply with NEC 501
code and applicable ABB certification drawings.
To prevent injury only a licensed electrician should install AC power
wiring to customer supplied primary AC power source.
Installation
In the following procedure, the common name for a component, its
jumper number if available (Abbreviated J) or part is followed by a
number in parentheses. For a complete overview of the XRC-195 board,
see Figure 1–5.
Instructions
Step Procedure
1.
The AC Charging Unit is shipped separately. When unit is
received, unpack and inspect all components for evidence of
damage. Report damage to shipping carrier and to Totalflow's
Service Department.
2.
Remove one of the plugs from the side of XRC so that AC
charging unit can be mounted without obstruction.
3.
Feed AC Charger DC power lines into XRC. Allow enough
cable to extend into unit for connection to CHGR Input +/-
terminals J17 (see
Figure 2–9
) on the Main Electronic Board.
4.
Connect AC Battery Pack Charger to XRC using supplied
sealing ring and nut (see Figure 2–11).
To prevent moisture from entering XRC after installing AC
Battery Pack Charger, be certain associated connector, at
Charger has a metal backed sealing “O” ring and metal
locking nut attached.
Continued on Next Page
Summary of Contents for XRC6490
