Toshiba Tecra 710CDT Maintenance Manual Download Page 113

Page: 113 / 222

710CDT/720CDT

3-59

NOTE:

When starting the computer in Resume mode, the last configuration is

remembered. If data does not appear on the display as selected after starting
Resume mode, press

Fn+F5

. This changes the display setting in the order of

internal LCD to simultaneous to external CRT.

(d)

Text Mode Stretch

Enables a larger screen display area.

Enabled

Enables the text mode stretch feature (Default).

Disabled

Disables the text mode stretch feature.

Password

(a)

User Password

Allows you to set or reset the user password for power on and instant secu-
rity.

Registered

The user password has been registered.

Not registered

The user password has not been registered.

(b)

Eject Password

This option is available to prevent an unauthorized user from removing the
computer from an optional Desk Station V Plus.

Enabled

The eject password has been registered.

Disabled

The eject password has not been registered (Default).

For details on setting passwords, refer to the computer User's Guide.

Hard Disk

Selects the hard disk mode.

Enhanced IDE

Select this mode when using MS-DOS

, Windows for

(Normal)

Workgroups

, Windows 95

, or OS/2

(Default).

Standard IDE

Select this mode when using Novell

NetWare

UNIX

. When this mode is selected, up to 504MB is

logically available even though the disk’s capacity is
larger than 504MB.

Not used

HDD is not installed.

Summary of Contents for Tecra 710CDT































































































































































































































Search results

Summary of Contents for Tecra 710CDT

Reviews:

Related manuals for Tecra 710CDT

Brands by name

Popular brands

Toshiba Tecra 710CDT, Maintenance Manual

Search results

Summary of Contents for Tecra 710CDT

Reviews:

Related manuals for Tecra 710CDT

Brands by name

Popular brands