manualshive.com logo in svg

Toshiba Tecra 710CDT, Maintenance Manual

The Toshiba Tecra 710CDT Maintenance Manual is a comprehensive and essential resource for users seeking to keep their device in top-notch condition. This invaluable manual can be easily accessed and downloaded for free from manualshive.com, ensuring you have the necessary guidance to maintain your Toshiba Tecra 710CDT.

Share
Download
background image

710CDT/720CDT

3-43

Enter the cylinder and head numbers of bad tracks and press 

Enter

.  Note that

if there are no bad tracks, pressing 

Enter 

without making an entry is the same

as executing 

All Track Format 

described in item (d) below.

Enter the cylinder and head number in decimal notation.  Repeat this entry for
each bad track you want to format.

After entering the bad tracks, press 

Enter 

to execute the format.

(d)

All track format

All tracks are formatted as good tracks except those registered as bad tracks
in item (c) above, or those identified as bad tracks in track verification
described in item (e) below.

(e)

Track verification

A check is made of all tracks and if an ECC error, ECC-correctable-data
error, or record-not-found error is detected at a track, that track is automati-
cally formatted as a bad track.

2.

Good track FORMAT

If a good track has been erroneously formatted as a bad track, you can use this
subtest to reformat the track as a good track.  To format a track as a good track,
enter the number for the drive, interleave, cylinder and head as indicated in the
screen prompt shown below.

Drive number select (1:#1, 2:#2) ?
Interleave number (1 / 1 - 8) ?
    Press [Cylinder number (dddd)] ?
    Press [Head number (dd)] ?

Press 

Enter 

to return to the Hard Disk Format menu.

3.

Bad track FORMAT

To format a track as a bad track, enter the number for the drive, interleave, cylinder
and head as indicated in the screen prompt shown below.

Drive number select (1:#1, 2:#2) ?
Interleave number (1 / 1 - 8) ?

Press [Cylinder number (dddd)] ?
Press [Head number (dd)] ?

Press 

Enter 

to return to the Hard Disk Format menu.

Summary of Contents for Tecra 710CDT































































































































































































































Reviews:

No comments

Related manuals for Tecra 710CDT

IBM ThinkPad R40 User Manual preview
ThinkPad R40
Brand: IBM Pages: 10
EUROCOM 4200 San Marino User Manual preview
4200 San Marino
Brand: EUROCOM Pages: 281
MAD DOG GCP600 Operating Manual & Warranty preview
GCP600
Brand: MAD DOG Pages: 5
Fujitsu Lifebook N6410 User Manual preview
Lifebook N6410
Brand: Fujitsu Pages: 112
Fujitsu LifeBook N6420 User Manual preview
LifeBook N6420
Brand: Fujitsu Pages: 128
Fujitsu Lifebook N3520 User Manual preview
Lifebook N3520
Brand: Fujitsu Pages: 112
Fujitsu Lifebook N6210 User Manual preview
Lifebook N6210
Brand: Fujitsu Pages: 136
Krüger & Matz Explore PRO 1510 Owner'S Manual preview
Explore PRO 1510
Brand: Krüger & Matz Pages: 44
Fujitsu LIFEBOOK N532 Operating Manual preview
LIFEBOOK N532
Brand: Fujitsu Pages: 82
Vivo STAND-LAP3 Instruction Manual preview
STAND-LAP3
Brand: Vivo Pages: 3
Dell Alienware 15 R3 Setup And Specifications preview
Alienware 15 R3
Brand: Dell Pages: 29
Dell Inspiron 3501 Setup And Specifications preview
Inspiron 3501
Brand: Dell Pages: 23
HP 645 G1 Overview preview
645 G1
Brand: HP Pages: 46
HP 6520s - Notebook PC Getting Started preview
6520s - Notebook PC
Brand: HP Pages: 56
HP 550 - Notebook PC Specification preview
550 - Notebook PC
Brand: HP Pages: 23
HP 6720t - mobile thin client Reference Manual preview
6720t - mobile thin client
Brand: HP Pages: 93
HP 655 Quickspecs preview
655
Brand: HP Pages: 24
HP 6530b - Compaq Business Notebook Specification Sheet preview
6530b - Compaq Business Notebook
Brand: HP Pages: 4

Brands by name

Popular brands

Load more brands