manualshive.com logo in svg

Toshiba Tecra 710CDT, Maintenance Manual

The Toshiba Tecra 710CDT Maintenance Manual is a comprehensive and essential resource for users seeking to keep their device in top-notch condition. This invaluable manual can be easily accessed and downloaded for free from manualshive.com, ensuring you have the necessary guidance to maintain your Toshiba Tecra 710CDT.

Share
Download
background image

710CDT/720CDT

3 - 3

3.2

Executing the Diagnostic Test

Toshiba MS-DOS is required to run the DIAGNOSTICS program.  To start the program follow
the steps listed below:

1.

Insert the Diagnostics Disk into the computer’s floppy disk drive and turn on the
computer. (The Diagnostics Disk contains the MS-DOS boot files.)

NOTE: To execute the CD-ROM test, make sure the CD-ROM and CD-ROM
drive are installed in the computer and that the external FDD is attached to
the FDD port.

The following menu will display:

TOSHIBA personal computer xxx DIAGNOSTICS
version X.XX (c) copyright TOSHIBA Corp. 19XX

DIAGNOSTICS MENU :

1 - DIAGNOSTIC TEST
2 - HARD DISK FORMAT
3 -
4 - HEAD CLEANING
5 - LOG UTILITIES
6 - RUNNING TEST
7 - FDD UTILITIES
8 - SYSTEM CONFIGURATION
9 - EXIT TO MS-DOS
0 - SETUP

↑ ↓ → ←

: Select items

Enter

: Specify

Esc

: Exit

NOTE: To exit the DIAGNOSTIC TEST menu, press the Esc key.  If a test
program is in progress, press Ctrl + Break to exit the test program, or Ctrl +
C to stop the program.

2.

To select the DIAGNOSTIC TEST menu from the DIAGNOSTICS menu, set the
highlight bar to 

1

 and press 

Enter

.

The following menu will display:

Summary of Contents for Tecra 710CDT































































































































































































































Reviews:

No comments

Related manuals for Tecra 710CDT

Gateway M250 Setup Manual preview
M250
Brand: Gateway Pages: 2
Panasonic Toughbook CF-Y5LWEZZBM Operating Instructions Manual preview
Toughbook CF-Y5LWEZZBM
Brand: Panasonic Pages: 36
InfoCase Fieldmate Series User Manual preview
Fieldmate Series
Brand: InfoCase Pages: 4
Fujitsu Lifebook i-4187 User Manual preview
Lifebook i-4187
Brand: Fujitsu Pages: 96
Fujitsu LifeBook i Series Bios Manual preview
LifeBook i Series
Brand: Fujitsu Pages: 36
Fujitsu LIFEBOOK E5411 Quick Start Manual preview
LIFEBOOK E5411
Brand: Fujitsu Pages: 2
Fujitsu LIFEBOOK E5412 Quick Start Manual preview
LIFEBOOK E5412
Brand: Fujitsu Pages: 2
Fujitsu LIFEBOOK E4411 Operating Manual preview
LIFEBOOK E4411
Brand: Fujitsu Pages: 93
Fujitsu LIFEBOOK E4411 Quick Start Manual preview
LIFEBOOK E4411
Brand: Fujitsu Pages: 2
Fujitsu LIFEBOOK E449 Operating Manual preview
LIFEBOOK E449
Brand: Fujitsu Pages: 84
Fujitsu Lifebook E6550 Instructions Manual preview
Lifebook E6550
Brand: Fujitsu Pages: 110
Fujitsu LIFEBOOK E734 Operating Manual preview
LIFEBOOK E734
Brand: Fujitsu Pages: 95
Fujitsu LIFEBOOK E549 Operating Manual preview
LIFEBOOK E549
Brand: Fujitsu Pages: 111
Fujitsu LIFEBOOK E544 Operating Manual preview
LIFEBOOK E544
Brand: Fujitsu Pages: 108
Fujitsu LIFEBOOK E5412 Operating Manual preview
LIFEBOOK E5412
Brand: Fujitsu Pages: 86
Fujitsu Lifebook E6150 User Manual preview
Lifebook E6150
Brand: Fujitsu Pages: 120
Fujitsu LIFEBOOK E548 Operating Manual preview
LIFEBOOK E548
Brand: Fujitsu Pages: 107
Fujitsu LifeBook E-6666 Manual preview
LifeBook E-6666
Brand: Fujitsu Pages: 110

Brands by name

Popular brands

Load more brands