manualshive.com logo in svg

Toshiba Tecra 710CDT, Maintenance Manual

The Toshiba Tecra 710CDT Maintenance Manual is a comprehensive and essential resource for users seeking to keep their device in top-notch condition. This invaluable manual can be easily accessed and downloaded for free from manualshive.com, ensuring you have the necessary guidance to maintain your Toshiba Tecra 710CDT.

Share
Download
background image

3-22

710CDT/720CDT

3.10 Async Test

To execute the Async Test, select 

7

 from the DIAGNOSTIC TEST menu, press 

Enter 

and

follow the directions as they are displayed on the screen.  The Async Test contains seven
subtests that test the asynchronous communication functions.  Move the highlight bar to the
subtest you want to execute and press 

Enter

.

The subtests require the following data format:

Method:

Asynchronous

Speed:

9600 BPS (Subtests 01 to 04)
38400 BPS (Subtests 05 to 07)

Data:

8 bits and one parity bit (EVEN)

Data pattern: 20h to 7Eh

The following message will appear at the bottom of the screen when Subtests 01, 02, 03, 05,
06, and 07 are selected:

Channel#1 = XXXXh
Channel#2 = XXXXh
Channel#3 = XXXXh
Select the Channel number (1/2/3)

The serial I/O port address is specified by the 

XXXXh 

number.  Select the serial port channel

number and press 

Enter 

to start the subtest.

Subtest 01

Wraparound (board)

NOTE: To execute this subtest, an RS-232-C wraparound connector
(34M741621G01) must be connected to the RS-232-C port.  The RS-232-C
wraparound connector wiring diagram is shown in Appendix F.

This subtest checks the data send/receive function through the wraparound
connector.

Subtest 02

Point to point (Send)

NOTE: To execute this subtest, two machines must be connected with an
RS-232-C direct cable.  One machine should be set as "send" (Subtest 02)
and the other set as "receive" (Subtest 03).  The wiring diagram for the RS-
232-C direct cable is shown in Appendix F.

This subtest sends 20h through 7Eh data to the receive side, then receives the
sent data and compares it to the original data.

Summary of Contents for Tecra 710CDT































































































































































































































Reviews:

No comments

Related manuals for Tecra 710CDT

Panasonic Toughbook CF-19KHRAG2M Reference Manual preview
Toughbook CF-19KHRAG2M
Brand: Panasonic Pages: 91
IBM Intel PRO/100 SP User Manual preview
Intel PRO/100 SP
Brand: IBM Pages: 72
IBM Power 750 Express Technical Overview And Introduction preview
Power 750 Express
Brand: IBM Pages: 204
Vadem Clio Service Manual preview
Clio
Brand: Vadem Pages: 106
Sony VPCZ13CGX Specifications preview
VPCZ13CGX
Brand: Sony Pages: 2
Sony VPCZ13AHX Specifications preview
VPCZ13AHX
Brand: Sony Pages: 2
Sony VPCZ133GM Specifications preview
VPCZ133GM
Brand: Sony Pages: 2
Sony VPCX135KX Specifications preview
VPCX135KX
Brand: Sony Pages: 2
Sony VPCZ122GX Quick Start Manual preview
VPCZ122GX
Brand: Sony Pages: 2
Sony VPCZ12BGX Specifications preview
VPCZ12BGX
Brand: Sony Pages: 2
Sony VPCY118GX Specifications preview
VPCY118GX
Brand: Sony Pages: 2
Sony VPCX111KX Quick Start Manual preview
VPCX111KX
Brand: Sony Pages: 2
Sony VPCW222AX Specification Sheet preview
VPCW222AX
Brand: Sony Pages: 2
Sony VPCW225AX Specification Sheet preview
VPCW225AX
Brand: Sony Pages: 2
Sony VPCX111KX Specifications preview
VPCX111KX
Brand: Sony Pages: 2
Sony VPCX131KX Specifications preview
VPCX131KX
Brand: Sony Pages: 2
Sony VPCW121AX - VAIO - Netbook Quick Start Manual preview
VPCW121AX - VAIO - Netbook
Brand: Sony Pages: 2
Sony VPCW212AX Specification Sheet preview
VPCW212AX
Brand: Sony Pages: 2

Brands by name

Popular brands

Load more brands