4-24
T4900CT
4.
Remove the tape, if necessary, then disconnect the
display cable
from
PJ3
and the
FL inverter cable
from
PJ2
on the upper system board (figure 4-22).
5.
Remove the
M2.5x6 screw
securing the
display ground cable
(figure 4-22).
Figure 4-22 Removing the display, FL, and ground cables
6.
Turn the computer around and remove the
two M2.5x6 silver screws
on the back
of the computer which secure the display assembly (figure 4-23).
Figure 4-23 Removing the screws (back of computer) securing the display assembly
Summary of Contents for T-Series T4900CT
