manualshive.com logo in svg

Toshiba T-Series T4500, User Manual

Share
Download
Toshiba T-Series T4500 User Manual Download Page 2

1-2

❑

Batteries

The T4500/T4600 Family has three different batteries:  a main battery, a backup battery,
and a Real Time Clock (RTC) battery.

❑

Expansion port

The T4500/T4600 Family has a unique 150-pin expansion port which attaches to a Desk
Station IV or Desk Station IV Plus.

❑

Personal Computer Memory Card International Association (PCMCIA) card slot

The T4500 and T4500C each have one PCMCIA slot, and the T4600 and T4600C each have
two PCMCIA slots which enable you to install a Toshiba MiNC card modem or other
industry standard PCMCIA card.

❑

Parallel port

The T4500/T4500C’s Centronics-compatible parallel interface port serve two purposes.
The port can be used to connect a Centronics-compatible printer or an external 5.25-inch
floppy disk drive.  T4600/T4600C’s port is a parallel interface only and does not support an
external floppy disk drive.

❑

RS-232-C port

The T4500/T4600 Family has one 9-pin serial interface port.

❑

Mouse port

The T4500/T4600 Family has one 6-pin mouse port on the back that can be connected to an
IBM PS/2 mouse.

❑

Keyboard port

The T4500/T4600 Family has one 6-pin keyboard port on the back that can be connected to
an IBM PS/2 keyboard.

❑

Microsoft Ball Point mouse with Quick Port (BPQP) connection

The T4500/T4600 Family has one BPQP port on the right.

❑

RGB port

The T4500/T4600 Family has one 15-pin RGB port on the back that can be connected to an
external video display.

❑

Memory card slot

The T4500/T4600 Family has one Toshiba optional memory card slot which enables you to
install an optional Toshiba memory card.

Summary of Contents for T-Series T4500





















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands