4 Replacement Procedures
4.22 Touch pad/Fingerprint sensor board
4-84
「
CONFIDENTIAL]
TECRA M11/Satellite Pro S500M Series Maintenance Manual (960-813)
4
Replacement Procedures
4.22 Touch pad/Fingerprint sensor board
Removing the Touch pad/Fingerprint sensor board
To remove the touch pad/fingerprint sensor board, follow the steps below and refer to Figure
4-46 to 4-50.
1.
Peel off the
acetate tapes
.
2.
Disconnect the
FS board FFC
and
touch pad button FFC
from the connectors
CN3240
and
CN9650
on the fingerprint sensor board.
3.
Disconnect the
dual button FFC
from the connector on the touch pad.
NOTE: In models without a dual button, there is no dual button FFC.
Figure 4-46 Removing the touch pad (1)
Acetate tape
Dual button FFC
FS board FFC
CN3240
CN9650
Touch pad
button FFC
Acetate tape
Summary of Contents for Satellite Pro S500M Series
Page 286: ... CONFIDENTIAL Chapter 4 Replacement Procedures ...
Page 402: ... CONFIDENTIAL Appendices ...