4.14 RTC battery
4 Replacement Procedures
TECRA M11/Satellite Pro S500M Series Maintenance Manual (960-813) [CONFIDENTIAL]
4-53
4.14 RTC battery
CAUTION: Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the laws and ordinances of your local
authority.
Removing the RTC battery
To remove the RTC battery, follow the steps below and refer to Figure 4-30.
1.
Peel off the
acetate tape
.
2.
Disconnect the
RTC battery harness
from the connector
CN9300
on the system
board.
3.
Open the
insulator
(RTC BATT INSULATOR) and take out the
RTC battery
.
Figure 4-30 Removing the RTC battery
Insulator
(RTC BATT INSULATOR)
RTC battery
CN9300
RTC battery harness
Acetate tape
Summary of Contents for Satellite Pro S500M Series
Page 286: ... CONFIDENTIAL Chapter 4 Replacement Procedures ...
Page 402: ... CONFIDENTIAL Appendices ...