4.10 SW board
4 Replacement Procedures
TECRA M11/Satellite Pro S500M Series Maintenance Manual (960-813)
[CONFIDENTIAL]
4-37
4.10 SW board
Removing the SW board
To remove the SW board, follow the steps below and refer to Figure 4-20.
1.
Turn up the
insulator
(LCD CONN INSULATOR) and disconnect the
SW board
FFC
from the connector
CN9500
on the system board.
2.
Push down the
hook
and slide the
SW board
in the direction as shown in the figure
below to remove it.
Figure 4-20 Removing the SW board
CN9500
SW board FFC
SW board
Hook
Guide
Insulator
(LCD CONN INSULATOR)
Summary of Contents for Satellite Pro S500M Series
Page 286: ... CONFIDENTIAL Chapter 4 Replacement Procedures ...
Page 402: ... CONFIDENTIAL Appendices ...
