4 Replacement Procedures
4.4 Memory module
4-18 [CONFIDENTIAL]
TECRA M11/Satellite Pro S500M Series Maintenance Manual (960-813)
Installing the Memory module
To install the memory module, confirm that the computer is shut down. Then follow the steps
below and refer to Figure 4-5 and 4-6.
CAUTION: When installing the memory module, make sure the computer is powered off.
Inserting a memory module with the power on might damage the module or
the computer itself.
Never press hard or bend a memory module.
1.
Insert the
memory module(s)
into the connector(s) slantwise and press it to connect
firmly.
CAUTION: The slot A is reserved for the first memory module. Use the slot B for
expanded memory. If only one module is installed, use the slot A.
After installing the memory module, make sure that the memory module is
secured with the left and right latches.
2.
Set the
memory module cover
and secure it with the
screw
.
3.
When the power of the computer is turned on, the computer checks automatically the
memory size. Confirm that the new memory is detected correctly.
4.
If the memory is not detected, check that it is connected correctly.
Summary of Contents for Satellite Pro S500M Series
Page 286: ... CONFIDENTIAL Chapter 4 Replacement Procedures ...
Page 402: ... CONFIDENTIAL Appendices ...
