Toshiba Satellite C650D Series Maintenance Manual Download

Page: 81 / 216

3 Diagnostic Programs

3.3Option

•

Report Destination

If selecting 'NONE', no log file will be generated; if selecting 'FILE', a log file with
the name specified in 'Log File Name' will be generated.

•

Log Options

Log Errors

If selecting this parameter, errors will be recorded when the test fails.

Log Test Activities

If selecting this parameter, the subtest results will be recorded.

Log Test Start Time

If selecting this parameter, the start time of the test will be recorded.

Log Test End Time

If selecting this parameter, the end time of the test will be recorded.

Log Errors Only

If selecting this parameter, errors will be recorded only when the test fails.

Log Errors Only with Time

If selecting this parameter, errors and time will be recorded only when the test
fails.

Append to Old Log File

If selecting this parameter, the new log will be added to the old one.

Satellite/Satellite Pro/C650D/C655D Maintenance Manual

Summary of Contents for Satellite C650D Series

























































































































































































































Search results

Summary of Contents for Satellite C650D Series

Reviews:

Related manuals for Satellite C650D Series

Brands by name

Popular brands

Toshiba Satellite C650D Series, Maintenance Manual

Search results

Summary of Contents for Satellite C650D Series

Reviews:

Related manuals for Satellite C650D Series

Brands by name

Popular brands