Toshiba Satellite C650D Series Maintenance Manual Download

Page: 142 / 216

4.4 HDD

4 Replacement Procedures

4.4 HDD

Removing the HDD

CAUTION: Do not press on the top or bottom of the drive.
Applying such pressure can either corrupt the data in the drive or
damage the drive.

Remove the HDD (hard disk drive) according to the following procedures and Figures 4-4, 4-
5.

Release the

one

HDD cover screw securing the HDD cover.

Release the M2.5x3 black flat head screw securing the HDD

pack.

Remove the HDD pack by pulling the pack, following the direction of the arrows.

Satellite/Satellite Pro/C650D/C655D Maintenance Manual

4-13

Summary of Contents for Satellite C650D Series

























































































































































































































Search results

Summary of Contents for Satellite C650D Series

Reviews:

Related manuals for Satellite C650D Series

Brands by name

Popular brands

Toshiba Satellite C650D Series, Maintenance Manual

Search results

Summary of Contents for Satellite C650D Series

Reviews:

Related manuals for Satellite C650D Series

Brands by name

Popular brands