Toshiba Satellite C650D Series Maintenance Manual Download

Page: 99 / 216

3 Diagnostic Programs

3.7 Storage

Subtest 01 HDD

This test item runs on IDE hard disks. It checks the functions and performance of IDE
hard disk.

In order to protect user’s HDD data, the password must be verified before the
HDD test. The screen is as follows:

Password

：

hard disk

Sequential/Random R/W

This test item is to check the HDD’s Read/Write function through data writing
and reading to HDD.

This test item needs user to submit the parameters:

IDE HDD Test Range

-- Specify the test coverage range of IDE HDD. If user

chooses Total Size, it means that the whole IDE HDD will be tested. Although
user can input the parameter into other select box, but the selected result is

Satellite/Satellite Pro/C650D/C655D Maintenance Manual

Summary of Contents for Satellite C650D Series

























































































































































































































Search results

Summary of Contents for Satellite C650D Series

Reviews:

Related manuals for Satellite C650D Series

Brands by name

Popular brands

Toshiba Satellite C650D Series, Maintenance Manual

Search results

Summary of Contents for Satellite C650D Series

Reviews:

Related manuals for Satellite C650D Series

Brands by name

Popular brands