Toshiba Satellite C650D Series Page 68 Maintenance Manual Download

Page: 68 / 216

3.2 Quick Start

3 Diagnostic Programs

NOTE 1: This test only for internal microphone!

If the machine doesn't have camera module, then it doesn't have internal
microphone. This test result will fail due to no internal microphone.

3.2.6 DMI Read

Read the information from the system’s SMBIOS and display it in the screen as follows:

User can press any key to exit the program.

3.2.7 DMI Write

In addition to reading the DMI information,

DMI Write

also permits attributes editing

and updating: Manufacture, Product Name, Version, Serial Number, and OEM Part
Number, etc. The following screen will be displayed:

Satellite/Satellite Pro/C650D/C655D Maintenance Manual

Summary of Contents for Satellite C650D Series

























































































































































































































Search results

Summary of Contents for Satellite C650D Series

Reviews:

Related manuals for Satellite C650D Series

Brands by name

Popular brands

Toshiba Satellite C650D Series, Maintenance Manual

Search results

Summary of Contents for Satellite C650D Series

Reviews:

Related manuals for Satellite C650D Series

Brands by name

Popular brands