Toshiba Satellite C650D Series Maintenance Manual Download

Page: 148 / 216

4.5 ODD Bay Module

4 Replacement Procedures

Disassembling the ODD Drive

NOTE: Do not disassemble the ODD drive when it is working normally. Disassemble
or replace the ODD drive only if it fails.

Disassemble the ODD drive according to the following procedures and Figure 4-7.

Remove two

M2x3 black flat head screws.

Remove

the

bracket.

M2x3 black flat head screw

ODD BRKT

ODD driver

Figure 4-7 Removing the bracket from the ODD drive

Assembling the ODD Drive

Assemble the ODD drive according to the following procedures and Figure 4-7.

Seat the bracket and secure it with two M2x3 black flat head screws.

Satellite/Satellite Pro/C650D/C655D Maintenance Manual

4-19

Summary of Contents for Satellite C650D Series

























































































































































































































Search results

Summary of Contents for Satellite C650D Series

Reviews:

Related manuals for Satellite C650D Series

Brands by name

Popular brands

Toshiba Satellite C650D Series, Maintenance Manual

Search results

Summary of Contents for Satellite C650D Series

Reviews:

Related manuals for Satellite C650D Series

Brands by name

Popular brands