Toshiba Satellite C650D Series Maintenance Manual Download

Page: 65 / 216

3 Diagnostic Programs

3.2 Quick Start

Test Result

System will automatically run and display the test result as follows:

Following is the comparison report of the two testing methods mentioned above:

1) Configuration and Running

As to the method used in Mouse test, the user is required to select test items by pressing

Space

key and set the parameters artificially, (See 3.3.3 Item’s Parameters

Configuration) Then press

to start the test. User should configure each parameter in

advance; otherwise the default parameters would be used. Using this method, user is
allowed to select more than one test item at one time.

2) Running the current test item

Satellite/Satellite Pro/C650D/C655D Maintenance Manual

Summary of Contents for Satellite C650D Series

























































































































































































































Search results

Summary of Contents for Satellite C650D Series

Reviews:

Related manuals for Satellite C650D Series

Brands by name

Popular brands

Toshiba Satellite C650D Series, Maintenance Manual

Search results

Summary of Contents for Satellite C650D Series

Reviews:

Related manuals for Satellite C650D Series

Brands by name

Popular brands