Toshiba Satellite C650D Series Maintenance Manual Download

Page: 69 / 216

3 Diagnostic Programs

3.2 Quick Start

In this screen, there are two lines which attribute could be edited and updated. The 1

line (the font in yellow with blue background) shows the attribute’s value that is read
from the current system and the 2

line (the font in red with turquoise background)

shows the same value as that in the 1

line before user’s editing. User can modify the

attribute’s value in the 2

line and press

Enter

to confirm the current edition and

continue editing the next attribute.

During the editing, user could press

to confirm the DMI attribute update or press

to ignore the modification. Press

ESC

to exit the program of DMI Write.

The confirmation screen is as below:

Satellite/Satellite Pro/C650D/C655D Maintenance Manual

Summary of Contents for Satellite C650D Series

























































































































































































































Search results

Summary of Contents for Satellite C650D Series

Reviews:

Related manuals for Satellite C650D Series

Brands by name

Popular brands

Toshiba Satellite C650D Series, Maintenance Manual

Search results

Summary of Contents for Satellite C650D Series

Reviews:

Related manuals for Satellite C650D Series

Brands by name

Popular brands