Toshiba Satellite C650D Series Maintenance Manual Download

Page: 164 / 216

4 Replacement Procedures

4.12 CPU

Removing the CPU

Remove the CPU according to the following procedures and Figures 4-19, 4-20 and 4-21.

CAUTION: When removing the CPU, keep the following in mind:

The CPU can become very hot during operation. Be sure to let it cool down before
starting repair work.

NOTE: FOXCONN CPU socket will be 180 degrees to the right.

Tear off the CPU mylar.

Unlock the CPU by rotating the cam on the CPU socket 120 degrees to the left with a
flat-blade screwdriver (in the order shown in the figure below).

Remove the CPU.

CPU Mylar

CPU

Figure4-19 Removing the CPU

Figure 4-20 Removing the CPU

4--34

Satellite/Satellite Pro/C650D/C655D Maintenance Manual

Summary of Contents for Satellite C650D Series

























































































































































































































Search results

Summary of Contents for Satellite C650D Series

Reviews:

Related manuals for Satellite C650D Series

Brands by name

Popular brands

Toshiba Satellite C650D Series, Maintenance Manual

Search results

Summary of Contents for Satellite C650D Series

Reviews:

Related manuals for Satellite C650D Series

Brands by name

Popular brands