Toshiba Satellite C650D Series Maintenance Manual Download

Page: 145 / 216

4 Replacement Procedures

4.4 HDD

4-16

Satellite/Satellite Pro/C650D/C655D Maintenance Manual

Installing the HDD

Install the HDD according to the following procedures and Figures 4-4, 4-5.

CAUTION: To avoid damage, always hold the HDD only by its sides.

Attach the HDD chassis.

Secure the HDD and its chassis with the four M2.5x2 black flat head screws.

CAUTION: To prevent the HDD bracket from being distorted when installing the HDD
pack into the computer, do not press the center of the HDD pack. Always hold the HDD
pack by its sides.

Install the HDD pack into the correct position in the computer. Connect the HDD
pack to the computer, holding the HDD pack by its sides.

Insert the HDD pack.

Secure the HDD cover by tightening the HDD cover screw.

Summary of Contents for Satellite C650D Series

























































































































































































































Search results

Summary of Contents for Satellite C650D Series

Reviews:

Related manuals for Satellite C650D Series

Brands by name

Popular brands

Toshiba Satellite C650D Series, Maintenance Manual

Search results

Summary of Contents for Satellite C650D Series

Reviews:

Related manuals for Satellite C650D Series

Brands by name

Popular brands