Toshiba Satellite C650D Series Maintenance Manual Download

Page: 150 / 216

4.6 Keyboard

4 Replacement Procedures

Satellite/Satellite Pro/C650D/C655D Maintenance Manual

4-21

Installing the Keyboard and RTC battery

Install the keyboard and RTC battery according to the following procedures and Figure 4-8.

Place RTC battery in battery locker in the correct position

Connect the keyboard cable to CN250 on the system board.

Secure the keyboard with four M2.5x2.5 black flat head screws.

Place the keyboard cover in the correct position and secure the following 14 latches,
in that order:
- One latch on right side and one latch on left side.
- Five bottom latches.
- Six front latches.

Summary of Contents for Satellite C650D Series

























































































































































































































Search results

Summary of Contents for Satellite C650D Series

Reviews:

Related manuals for Satellite C650D Series

Brands by name

Popular brands

Toshiba Satellite C650D Series, Maintenance Manual

Search results

Summary of Contents for Satellite C650D Series

Reviews:

Related manuals for Satellite C650D Series

Brands by name

Popular brands