Toshiba RD-XS24SB, Service Manual

Page: 85 / 210

Operating Instructions
12-35
Editing
Others
Introduction
Function
setup
Recording
Playback
Resuming playback from the location last
stopped (Title resume)
The recorder memorizes the location you last stopped
playback to resume from there.
To use this function, set “HDD/RAM title play” (
page 121) to “Title resume.” The recorder will
memorize the location you last stopped at in each title,
so you can resume playback from there. For example,
if there are 6 titles, you can start each of them as if
you had stored 6 video tapes in the recorder.
• To return to the beginning of the title
During playback, press QUICK MENU button, then
press
/ buttons to select “Restart title,” then
press ENTER button.
• To play another title
Press the HDD or DVD button to display “CONTENT
MENU Title List,” then select a title.
You can make the recorder memorize only the very
last point, regardless of the number of titles. Set
“HDD/RAM title play” (
page 121) to “Serial
playback.”
• To return to the beginning of the title
Press SKIP REV ( ) button repeatedly until the
beginning of the title appears.
• To play the other title
Press SKIP REV ( ) or SKIP FWD ( ) button
repeatedly.
Notes
• Depending on conditions or contents, playback may not
start from the location last stopped at, but instead another
location. For example, from the beginning of the disc or
title.
• Depending on the disc, there may be a slight difference
between the location the recorder memorized and the
actual location where playback starts.
• This function is not available on DVD-R/RW discs.
• The resuming function will not work if the write-protect tab
is set to “PROTECT” ( page 7).
To play a recorded title while recording another
on the same disc (Recorded Title Play)
During recording, you can play a title recorded on the
same disc.
1) While recording, press HDD or DVD.
2) Press / / / to select a desired title, then
press the ENTER.
Playback of the selected title starts.
Pressing the STOP button stops playback, and the
content currently recorded returns. If you press the
PLAY button, playback resumes from the location
you last stopped.
Notes
• The playback picture may appear after a delay of several
seconds.
• While you are using this function, the following operations/
functions are not available.
- Programmed playback (repeat playback, etc.)
- Editing (Playlist programming, dubbing, title/chapter
naming, etc.)
Playing all titles (original/playlist) in a disc
Set “HDD/RAM title play” ( page 121) to “Serial
playback”. You can play all titles in the HDD and DVD-
RAM disc in the order of the thumbnails on CONTENT
MENU, as if they were recorded in one video tape.
Checking the background information on a
selected title
1) At step 2 on page 46, select a title (chapter)
then press QUICK MENU.
The Quick Menu appears.
2) Press / to select “Title information”, then
press ENTER.
Detailed information of a selected title (chapter)
appears. You can switch the chapters in the title by
pressing the SKIP REV (
) or SKIP FWD ( )
buttons.
Notes
• From the Quick Menu on the “CONTENT MENU Title
Information”, you can change the details such as name,
genre or time.
• You can protect the title from unexpected erasure
( page 43).
• To return to the previous display, press the RETURN
button.