Toshiba RD-XS24SB, Service Manual

Page: 70 / 210

Playback
Recording
Editing
Others
Introduction
Function
setup
A timer program with this mark will be executed, To disengage, remove
this indicator.
Select a channel you want to record.
Select a date of a TV programme you want to record.
Enter a starting time of recording. (An initial setting is 10 minutes later.)
You can also use the number buttons.
Enter an end time. (Set the timer to begin recording no sooner than 2
minutes past the current time. Recording must not exceed 8 hours.)
You can also use the number buttons.
When you record on a DVD-RAM/RW/R disc.
When you record on the HDD.
For recording in the best picture quality, but shorter than “SP” in
recording time. (More disc capacity is required.)
Standard setting of recording time and picture quality.
For longer recording, but inferior to “SP” in picture quality.
Customized setting of rate (bit rate).
To set a rate automatically according to the remaining volume of the
disc. (If the disc does not have room for the TV programme, the
programme cannot be recorded to the end.)
When you select the HDD, the recorder records for a length of time
corresponding to that of a blank DVD-RAM disc (4.7GB). Not
applicable to a recording for 2.5 hours or longer.
Not applicable when “XP”, “SP”, “LP” or “AT” is selected. You can set a
rate from 1.0, 1.4 and at intervals of 0.2Mbps from 2.0 to 9.2. (The
upper limit of the value depends on the “Audio” setting.)
Standard setting.
Superior to D/M1.Recommended for recording music programmes.
Uncompressed original digital audio. Equal quality to audio CD, but
recordable time will be shorter.
Exec
Ch
Date
Start*
End*
Media
Pict.
Pict.
Audio
√
1-99, L, AV1, AV2
Specified date (from today to 2
month later)
Every Sunday to Saturday, Monday
to Thursday, Monday to Friday,
Monday to Saturday, everyday.
0:00 - 23:59
0:00 - 23:59
DVD
HDD
XP
SP
LP
MN(Manual)
AT(Auto)
1.0, 1.4, 2.0-9.2
D /M1
D /M2
L-PCM
Setting items at step 4, 7 ( page 30)
The digital recording technology for consumer products of Dolby Laboratories is used for D/M1 and D/M2. Dolby
Digital 192 kbps is set for D/M1 and Dolby Digital 384 kbps for D/M2.
Notes
• “Start” and “End” accept time up to 30:59 if you use the number buttons. When you enter a time over 24:00 and press the
ENTER button, “Date” will gain one day, and the time will be corrected to 0:00-6:59.
• If you record with setting the bit rate to about 4.0 Mbps or below, the recorded pictures may not be played properly if change
the playback speed. There will be noise, and the picture quality is lower than other rate settings.
Operating Instructions
12-20