126
Hook
Adjust cover
Wire
Wire fixing part
Hook
1
2
No.
1
Part name
Center panel
(Continued)
Procedure
Note)
If the center panel holders do not slide, loosen the
screws a little more.
The direction to open the center panel is
beforehand decided.
The opening side is the moving side when
pushing edge of the center panel upward, and
the side which does not practically move is the
hanging side.
• While pushing edge
1
of opening port side
of the center panel, pull it to the opening
port side
2
.
• When pulling the panel, the hanging side
lowers by one step and the hook at opening
port side is removed.
∗
Hold the positions near the hook at both
sides of the center panel, and remove
hooks at opening port sides one by one.
• Confirm that hanging sides at both sides
lowered by one step, turn it downward slowly
3
and open the center panel.
∗
Open the center panel until there is no
slackness on the wire at both sides.
4) Take off the wire from fixing part of wire on the
adjust cover.
5) While lifting up the center panel
1
upward,
slide it to the hanged direction
2
. The hook
is removed.
Remarks
Figure 3
Center panel holder slid
Center panel holders
Center panel holders
Center panel
Center panel
