130
No.
5
Part name
Fan motor
Turbo fan
Bell mouth
Procedure
1. Detachment (In case of AP009)
1) Perform work Detachment 1 of
3
.
2) Take off screws (Ø4 × 8, 4 pcs.) and then
remove the bell mouth.
3) Take off nut and remove the turbo fan
while supporting the turbo fan so that it
does not fall.
4) Take off screws (Ø4 × 8, 2 pcs.) which fix
the piping keep plate and then remove the
piping keep plate.
5) Remove the fan motor wire from the
clamp.
6) Take off nuts (3 positions) and then
remove the fan motor.
Note)
Take off nuts while supporting the fan motor so
that it does not fall.
2. Attachment (In case of AP009)
1) Attach all the fan motor, turbo fan, bell
mouth and electric parts box as original.
Be sure to perform wiring in the electric
parts box as original.
Note)
Pass the fan motor wires necessarily through
the clamp and the specified fixing slit of the
drain pan.
2) Check that the turbo fan does not hit the
fan motor wiring by turning lightly the
turbo fan with hands.
3) Attach the air filter and the center panel
as original.
Remarks
In case of AP009 type
Turbo fan
Turbo fan
Turbo fan
Turbo fan
Bell mouth
Bell mouth
Fixing slit for
fan motor wiring
Fan motor
wiring
Nut
Nut
Nut
Nut
Drain pan
Drain pan
Fan motor
Wiring keep plate
Screws
Screws
Clamp
Clamp
Screws
Screws
Turbo fan
Turbo fan
Bell mouth
Nut
Nut
Drain pan
Screws
Clamp
Screws
