132
No.
7
Part name
Frame cover
Adjust cover
Procedure
1. Detachment
1) Perform work of Detachment 1 of
2
.
2) Take off screw (Ø4 × 10, 1 pc.) and then
remove the frame cover while pushing
the claw to inner side.
3) Take off screws which fix the adjust
cover. (Ø4 × 10, 2 pcs.: mark is sign.)
4) Move the slide levers (2 positions) to
inner side to move them to OPEN
position
1
. Move the slide levers while
pushing them.
5) Remove the adjust cover while sliding it
to the arrow mark direction
2
by
pushing it with hands so that it does not
fall.
2. Attachment
1) Loosen the mounting screws
(Ø5 × 40, 2 pcs.) which fix the indoor unit
and the ceiling panel and then lower the
ceiling panel by approx. 10mm.
Note)
If you do not loosen the mounting screws, the
adjust cover is not fixed.
2) Referring to the diagram “How to mount
the adjust cover”, push the projected part
of the adjust cover by thumb in the inner
frame while widening it with hands.
3
In this time, be sure to insert claws into
the inner and outer frames.
3) Pull (A) part to the arrow direction until
one side each matches with the hole part
( mark is sign.) and then move the
slide lever to the LOCK position
4
.
Move the slide lever while pushing it.
4) Using screws (Ø4 × 10, 2 pcs.) taken off
in 1. Detachment of
6
, fix it.
Note)
When attaching the adjust cover, be sure to
move it until there is no clearance at matching
part with the outer frame.
5) Tighten screws (Ø5 × 40, 2 pcs.)
loosened in 1) Attachment of 2-
7
as
original.
6) Put in claw of the frame cover and then
fix it with screw (Ø4 × 10, 1 pc.)
Note)
Perform attachment as original.
The incomplete attachment may cause dewing.
In attachment work, be sure that the louver
motor wires are not caught in.
7) Attach the air filter and the center panel
as original.
Remarks
4
4
3
2
3
LOCK position:
At shipment
(Locked status)
OPEN
positions
Mounting
screw
Mounting
screw
Outer frame
mark
is sign
Adjust
cover
Screws
(2 pcs.)
Removing
direction
Projected
part
Projected part
Inner frame
Adjust cover
Slide lever
A
parts
Outer frame
Frame cover
Slide lever
Adjust
cover
Slide lever
Claw
1
1
