Toshiba MMD-VN1002HEX1E, Installation Manual

Page: 59 / 86

– 58 –
5
Installation of indoor unit
WARNING
• Install the air conditioner at enough strong place to withstand the weight of the unit.
If the strength is not enough, the unit may fall down resulting in injury.
• To provide against strong wind or an earthquake, install the unit appropriately.
Inappropriate installation may result in the unit falling down and causing an accident.
NOTE
Strictly comply with the following rules to prevent damage of the indoor units
and human injury.
• Do not put a heavy article on the indoor unit. (Even units are packaged)
• Carry in the indoor unit as it is packaged if possible. If carrying in the indoor unit
unpacked by necessity, be sure to use buffering cloth, etc. to not damage the unit.
• To move the indoor unit, hold the hooking metals (4 positions) only.
Do not apply force to the other parts (refrigerant pipe, drain pan, foamed parts, or
resin parts, etc.).
Before you handle hanging brackets, put on thick gloves for protection.
• Supplied accessories are placed near the electrical control box. Do not dispose
of the accessories with the packaging. (See the figure on the right.)
• When a vibration-proof hanging bracket is attached to a hanging bolt, confirm that the unit does not vibrate more
through using the vibration-proof hanging bracket.
• Use a forklift to carry the unit. As it is packed in a cardboard box, do not drag or push it.
• Suction duct length must be longer than 850 mm.
• Helmet must be worn to protect your head from falling objects.
Especially, when you work under an inspection opening, helmet must be worn to protect your head from falling
objects from the opening.
 External dimensions
Box for supplied
accessories
SA
(Supply air)
RA
(Return air)
EA
(Exhaust air)
OA
(Outdoor air)
40
0
G
J
A
D
K
80
0
ØI
ØH
40
0
D
B
C 550
F
E
E
43
0
E
E
Maintenance cover
Inspection cover
Electrical control cover
Unit: mm
Center of gravity
Model No. A B C D E F
MMD-VNK502HEX1E, VN502HEX1E 1,690 1140 1140 250 175 350
MMD-VNK802HEX1E, VN802HEX1E 1,739 1189 1189 275 200 400
MMD-VNK1002HEX1E, VN1002HEX1E 1,739 1189 1189 275 200 400
MMD-VNK1002HEX1E2, VN1002HEX1E2 1,739 1189 1189 275 200 400
Model No. G H I J K
Duct
diameter
Diameter of
refrigerant
piping at the
gas side (L)
Diameter of
refrigerant
piping at the
liquid side (M)
MMD-VNK502HEX1E, VN502HEX1E 175 Ø195 Ø212 1601 1197 Ø200 Ø9.5 Ø6.4
MMD-VNK802HEX1E, VN802HEX1E 200 Ø245 Ø262 1650 1246 Ø250 Ø12.7 Ø6.4
MMD-VNK1002HEX1E, VN1002HEX1E 200 Ø245 Ø262 1650 1246 Ø250 Ø12.7 Ø6.4
MMD-VNK1002HEX1E2, VN1002HEX1E2 200 Ø245 Ø262 1650 1246 Ø250 Ø12.7 Ø6.4
Model No. X Y Z Weight
MMD-VNK502HEX1E 902 643 174 91
MMD-VNK802HEX1E 901 667 199 111
MMD-VNK1002HEX1E 900 667 199 112
MMD-VNK1002HEX1E2 894 666 199 114
MMD-VN502HEX1E 870 642 174 84
MMD-VN802HEX1E 856 663 198 100
MMD-VN1002HEX1E 853 663 198 101
MMD-VN1002HEX1E2 858 662 198 103
X
Y
Z
115-EN 116-EN
+00EH99887601-2_01EN.book Page 58 Thursday, September 15, 2016 5:23 PM