Toshiba MMD-VN1002HEX1E, Installation Manual

Page: 83 / 86

– 82 –
Checking the settings of the indoor units
Before handing the system over to the customer, check the addresses and settings of the indoor units, then fill in
the check sheet below. When you have installed a group control system, fill in the check sheet for each system and
for each indoor unit. (You can enter the settings of 4 indoor units in to one check sheet.)
NOTE
For maintenance after installation, fill in the check sheet and hand over this Installation manual to the customer.
 Indoor unit settings check sheet
Indoor unit Indoor unit Indoor unit Indoor unit
Model name Model name Model name Model name
Check the addresses of the indoor units. (For details, see “Advanced control” in this manual.)
(Code: [12] for the system, [13] for indoor units, and [14] for groups)
Line Indoor Group Line Indoor Group Line Indoor Group Line Indoor Group
Settings Settings Settings Settings
Did you change the setting for the lighting-up hours of the Filter Sign?
If you did not, put a tick against “No change”. If you did, put a tick against the item you selected.
(For details, see “Advanced control” in this manual.)
Lighting-up hours of the Filter
Sign
(Code: [01])
Lighting-up hours of the Filter
Sign
(Code: [01])
Lighting-up hours of the Filter
Sign
(Code: [01])
Lighting-up hours of the Filter
Sign
(Code: [01])

No change

None
 150H

2500H
 5000H

10000H
[0000]
[0001]
[0002]
[0003]
[0004]

No change

None
 150H

2500H
 5000H

10000H
[0000]
[0001]
[0002]
[0003]
[0004]

No change

None
 150H

2500H
 5000H

10000H
[0000]
[0001]
[0002]
[0003]
[0004]

No change

None
 150H

2500H
 5000H

10000H
[0000]
[0001]
[0002]
[0003]
[0004]
Did you change the setting for the detect temperature shift value? If you did not, select the “No change” checkbox. If you did, select the
checkbox of an item. (For details, see “Advanced Control” in this manual.)
Detect temperature shift value
(Code: [06]) Detect temperature shift value
(Code: [06]) Detect temperature shift value
(Code: [06]) Detect temperature shift value
(Code: [06])

No change
 No shift

+ 1 °C

+ 2 °C
 + 3 °C

+ 4 °C
 + 5 °C

+ 6 °C
[0000]
[0001]
[0002]
[0003]
[0004]
[0005]
[0006]

No change
 No shift

+ 1 °C

+ 2 °C
 + 3 °C

+ 4 °C
 + 5 °C

+ 6 °C
[0000]
[0001]
[0002]
[0003]
[0004]
[0005]
[0006]

No change
 No shift

+ 1 °C

+ 2 °C
 + 3 °C

+ 4 °C
 + 5 °C

+ 6 °C
[0000]
[0001]
[0002]
[0003]
[0004]
[0005]
[0006]

No change
 No shift

+ 1 °C

+ 2 °C
 + 3 °C

+ 4 °C
 + 5 °C

+ 6 °C
[0000]
[0001]
[0002]
[0003]
[0004]
[0005]
[0006]
Did you change the setting for the single operation of the Air to Air Heat Exchanger with direct expansion coil?
If you did not, put a tick against “No change”. If you did, put a tick against the item you selected.
(For details, see “Advanced control” in this manual.)
Single operation of the Air to Air
Heat Exchanger with direct
expansion coil
(Code: [31])
Single operation of the Air to Air
Heat Exchanger with direct
expansion coil
(Code: [31])
Single operation of the Air to Air
Heat Exchanger with direct
expansion coil
(Code: [31])
Single operation of the Air to Air
Heat Exchanger with direct
expansion coil
(Code: [31])
 No change

No

Yes
[0000]
[0001]
 No change

No

Yes
[0000]
[0001]
 No change

No

Yes
[0000]
[0001]
 No change

No

Yes
[0000]
[0001]
Did you change the setting for the remote controller sensor? If you did not, select the “No change” checkbox. If you did, select the checkbox
of an item. (For details, see “Advanced Control” in this manual.)
Remote controller sensor
(Code: [32]) Remote controller sensor
(Code: [32]) Remote controller sensor
(Code: [32]) Remote controller sensor
(Code: [32])
 No change

Do not use

Use
[0000]
[0001]
 No change

Do not use

Use
[0000]
[0001]
 No change

Do not use

Use
[0000]
[0001]
 No change

Do not use

Use
[0000]
[0001]
Did you change the setting for the imbalance ventilation operation?
If you did not, put a tick against “No change”. If you did, put a tick against the item you selected.
(For details, see “Advanced control” in this manual.)
Imbalance ventilation operation
(Code: [48]) Imbalance ventilation operation
(Code: [48]) Imbalance ventilation operation
(Code: [48]) Imbalance ventilation operation
(Code: [48])

No change
 Normal

SA (High) >
EA (Low)
active

SA (Low) <
EA (High)
active
[0000]
[0001]
[0002]

No change
 Normal

SA (High) >
EA (Low)
active

SA (Low) <
EA (High)
active
[0000]
[0001]
[0002]

No change
 Normal

SA (High) >
EA (Low)
active

SA (Low) <
EA (High)
active
[0000]
[0001]
[0002]

No change
 Normal

SA (High) >
EA (Low)
active

SA (Low) <
EA (High)
active
[0000]
[0001]
[0002]
* “High” may be “Extra High”. * “High” may be “Extra High”. * “High” may be “Extra High”. * “High” may be “Extra High”.
Did you change the setting for the nighttime heat purge operation?
If you did not, put a tick against “No change”. If you did, put a tick against the item you selected.
(For details, see “Advanced control” in this manual.)
Nighttime heat purge operation
(Code: [4C]) Nighttime heat purge operation
(Code: [4C]) Nighttime heat purge operation
(Code: [4C]) Nighttime heat purge operation
(Code: [4C])
 No change
 Nighttime
heat purge
OFF

Start after
the setting
value x 1
hour(s)
[0000]
[0001]-
[0048]
 No change
 Nighttime
heat purge
OFF

Start after
the setting
value x 1
hour(s)
[0000]
[0001]-
[0048]
 No change
 Nighttime
heat purge
OFF

Start after
the setting
value x 1
hour(s)
[0000]
[0001]-
[0048]
 No change
 Nighttime
heat purge
OFF

Start after
the setting
value x 1
hour(s)
[0000]
[0001]-
[0048]
Did you change the setting for the linked operation with external devices?
If you did not, put a tick against “No change”. If you did, put a tick against the item you selected.
(For details, see “Advanced control” in this manual.)
Setting of the linked operation
with external devices
(Code: [4E])
Setting of the linked operation
with external devices
(Code: [4E])
Setting of the linked operation
with external devices
(Code: [4E])
Setting of the linked operation
with external devices
(Code: [4E])

No change
 ON/OFF
linked

ON linked
 OFF linked
[0000]
[0001]
[0002]

No change
 ON/OFF
linked

ON linked
 OFF linked
[0000]
[0001]
[0002]

No change
 ON/OFF
linked

ON linked
 OFF linked
[0000]
[0001]
[0002]

No change
 ON/OFF
linked

ON linked
 OFF linked
[0000]
[0001]
[0002]
Did you change the setting for changing the ventilation mode?
If you did not, put a tick against “No change”. If you did, put a tick against the item you selected.
(For details, see “Advanced control” in this manual.)
Changing the ventilation mode
(Code: [EA]) Changing the ventilation mode
(Code: [EA]) Changing the ventilation mode
(Code: [EA]) Changing the ventilation mode
(Code: [EA])
 No change

Heat
exchange
mode
 Automatic
mode
[0002]
[0003]
 No change

Heat
exchange
mode
 Automatic
mode
[0002]
[0003]
 No change

Heat
exchange
mode
 Automatic
mode
[0002]
[0003]
 No change

Heat
exchange
mode
 Automatic
mode
[0002]
[0003]
Compatible with RBC-AMT32E Compatible with RBC-AMT32E Compatible with RBC-AMT32E Compatible with RBC-AMT32E
Indoor unit Indoor unit Indoor unit Indoor unit
Model name Model name Model name Model name
Check the addresses of the indoor units. (For details, see “Advanced control” in this manual.)
(Code: [12] for the system, [13] for indoor units, and [14] for groups)
Line Indoor Group Line Indoor Group Line Indoor Group Line Indoor Group
Settings Settings Settings Settings
163-EN 164-EN
+00EH99887601-2_01EN.book Page 82 Thursday, September 15, 2016 5:23 PM