Toshiba MMD-VN1002HEX1E, Installation Manual

Page: 84 / 86

– 83 –
Indoor unit Indoor unit Indoor unit Indoor unit
Model name Model name Model name Model name
Check the addresses of the indoor units. (For details, see “Advanced control” in this manual.)
(Code: [12] for the system, [13] for indoor units, and [14] for groups)
Line Indoor Group Line Indoor Group Line Indoor Group Line Indoor Group
Settings Settings Settings Settings
Did you change the setting for changing the ventilation FAN speed?
If you did not, put a tick against “No change”. If you did, put a tick against the item you selected.
(For details, see “Advanced control” in this manual.)
Changing the ventilation FAN
speed
(Code: [EB])
Changing the ventilation FAN
speed
(Code: [EB])
Changing the ventilation FAN
speed
(Code: [EB])
Changing the ventilation FAN
speed
(Code: [EB])
 No change

High

Low
 Imbalance
[0002]
[0003]
[0004]
 No change

High

Low
 Imbalance
[0002]
[0003]
[0004]
 No change

High

Low
 Imbalance
[0002]
[0003]
[0004]
 No change

High

Low
 Imbalance
[0002]
[0003]
[0004]
* “High” may be “Extra High”.
Compatible with RBC-AMT32E * “High” may be “Extra High”.
Compatible with RBC-AMT32E * “High” may be “Extra High”.
Compatible with RBC-AMT32E * “High” may be “Extra High”.
Compatible with RBC-AMT32E
Did you change the setting for changing the operation output?
If you did not, put a tick against “No change”. If you did, put a tick against the item you selected.
(For details, see “Advanced control” in this manual.)
Changing the operation output
(Code: [ED]) Changing the operation output
(Code: [ED]) Changing the operation output
(Code: [ED]) Changing the operation output
(Code: [ED])
 No change

ON during
normal
operation
 ON during
normal
operation
or the
nighttime
heat purge
operation
 ON during
the
nighttime
heat purge
operation

ON when
the SA fan
is running
 ON when
the EA fan
is running
[0000]
[0001]
[0002]
[0003]
[0004]
 No change

ON during
normal
operation
 ON during
normal
operation
or the
nighttime
heat purge
operation
 ON during
the
nighttime
heat purge
operation

ON when
the SA fan
is running
 ON when
the EA fan
is running
[0000]
[0001]
[0002]
[0003]
[0004]
 No change

ON during
normal
operation
 ON during
normal
operation
or the
nighttime
heat purge
operation
 ON during
the
nighttime
heat purge
operation

ON when
the SA fan
is running
 ON when
the EA fan
is running
[0000]
[0001]
[0002]
[0003]
[0004]
 No change

ON during
normal
operation
 ON during
normal
operation
or the
nighttime
heat purge
operation
 ON during
the
nighttime
heat purge
operation

ON when
the SA fan
is running
 ON when
the EA fan
is running
[0000]
[0001]
[0002]
[0003]
[0004]
Did you change the setting for changing the abnormal signal / bypass ventilation signal output?
If you did not, put a tick against “No change”. If you did, put a tick against the item you selected.
(For details, see “Advanced control” in this manual.)
Changing the abnormal signal /
bypass ventilation signal output
(Code: [EE])
Changing the abnormal signal /
bypass ventilation signal output
(Code: [EE])
Changing the abnormal signal /
bypass ventilation signal output
(Code: [EE])
Changing the abnormal signal /
bypass ventilation signal output
(Code: [EE])
 No change

ON when an
abnormal
signal is
detected
 ON when
the bypass
ventilation
signal is
detected
[0000]
[0001]
 No change

ON when an
abnormal
signal is
detected
 ON when
the bypass
ventilation
signal is
detected
[0000]
[0001]
 No change

ON when an
abnormal
signal is
detected
 ON when
the bypass
ventilation
signal is
detected
[0000]
[0001]
 No change

ON when an
abnormal
signal is
detected
 ON when
the bypass
ventilation
signal is
detected
[0000]
[0001]
165-EN 166-EN
+00EH99887601-2_01EN.book Page 83 Thursday, September 15, 2016 5:23 PM