Toshiba L64 Series User Manual Download Page 87

Page: 87 / 104

Engl

ish

CONTROLS AND FEATURES

If an HDMI CEC Control device with HDMI switching

capability (e.g. AV amplifier) is connected to the HDMI

input, you can select another HDMI CEC Control device

that is connected to the master HDMI device on the input

source list.

Press

and a list will appear on screen showing

available input sources.

Press

to select the input source that the HDMI

CEC Control devices are connected.

Press

and a second selection screen will appear

showing all connected HDMI CEC Control
equipment.

Press

to select the desired input source,

and then press

NOTE:

• These functions depend on the device connected.

If you select the HDMI CEC Control input source from
the popup window, some HDMI CEC Control devices
may automatically turn on.

• If the HDMI cable from connected equipment is

changed,

Enable

in the HDMI CEC Control Setup menu

may need to be reset to

• If you change the HDMI lead to a connected device or

change an HDMI device setting, reset the

Enable HDMI

CEC Control

item on the HDMI CEC Control Setup

menu from

Off

When connected equipment is switched on, HDMI CEC

Control will automatically detect the television through the

input selection. If the television is in Standby, it will be

switched on automatically.

These functions can be enabled or disabled from the

HDMI CEC Control Setup

(see page 86).

NOTE:

• Even if the equipment is showing a menu, the television

may automatically show the input source.

• This feature depends on the connected equipment and

television state.

• Even if the HDMI cable is connected during PVR

playback, the television does not automatically display
the HDMI input signal.

If the television is turned off (Standby), the television will

send a message to turn off (Standby) all of the HDMI CEC

Control devices connected to the television.

These functions can be enabled or disabled from the

HDMI CEC Control Setup

(see page 86).

NOTE:

This feature depends on the connected equipment

and television state.

HDMI CEC Control input source

selection

HDMI 1
HDMI 2

HDMI 3

HDMI 4
PC

Inputs

DVD

VCR/DVR

CBL/SAT

GAME/TV

AUX

HDMI CEC Control one touch play

HDMI CEC Control system standby

Summary of Contents for L64 Series








































































































Search results

Summary of Contents for L64 Series

Reviews:

Related manuals for L64 Series

Brands by name

Popular brands

Toshiba L64 Series, User Manual

Search results

Summary of Contents for L64 Series

Reviews:

Related manuals for L64 Series

Brands by name

Popular brands