Toshiba L64 Series User Manual Download Page 50

Page: 50 / 104

lis

CONTROLS AND FEATURES

Highlight

Done

and press

NOTE:

When

Encryption

None

, a message will

appear. Press

to select

Yes

and press

NOTE:

Settings are not saved if

BACK

is pressed before

Done

is selected.

Wireless Information

The settings configured in Wireless Setup can be
confirmed.

Press

QUICK

to open the

Quick Menu

Press

to select

Wireless Information

and

press

When the

Network Type

Wireless

, a Wireless

Information window will appear.

NOTE:

Press the

RED

button to scan for all APs.

NOTE:

Even if an AP for IEEE 802.11n is used when

Encryption

is set to

WEP

TKIP

, the Speed value might

be low. It is recommended that

Encryption

be changed to

AES

(see “Manual Setup” on page 49).

Notes on wireless LAN environment

• The function of all IEEE802.11 is not supported.
• The ad-hoc mode is not supported.
• It is recommended to use IEEE 802.11a or IEEE

802.11n on 5 GHz for audio and SD video streaming.

• It is recommended to use IEEE 802.11n on 5 GHz for

HD video streaming.

• It is recommended that the encoding rate for streaming

video content is 20 Mbps or less.

• It is not recommended to use 2.4 GHz for audio and

video streaming.

• Content playback may be interrupted by various

surrounding interference.

Intel® WiDi / wireless display
Picture Mode

Standard

Picture Size

Wide

3D Settings
More Information
Channel Options
Sleep Timer
HDMI CEC Device Control
Speakers

TV Speakers

Headphone Level

Wireless Information

My TV Library
Recording Information

Quick Menu

Item

Description

Status

Connected

is displayed when the TV is

connected with the AP.

Disconnected

is displayed when the

TV is not connected with the AP.

Signal

Connection signal strength with AP
(

STRONG

MEDIUM

WEAK

)

Speed

Link with AP

Mode

Working mode (11a, 11b, 11g, 11n)

Channel

Used channel

Network
Name

SSID set

Authentication Authentication set

Encryption

Encryption set

Security Key

Security Key set

AP MAC
Address

The AP’s MAC address is displayed
when the TV is connected with the AP.

TV MAC
Address

The MAC address of the TV(Wireless)
is displayed.

DHCP

Enabled

is displayed when using

DHCP.

Disabled

is displayed when not using

DHCP.

IP Address

The TV’s IP address

Subnet Mask

Value of the Subnet Mask

Default
Gateway

Address of the Default GATEWAY

DNS

Address of the DNS

Summary of Contents for L64 Series








































































































Search results

Summary of Contents for L64 Series

Reviews:

Related manuals for L64 Series

Brands by name

Popular brands

Toshiba L64 Series, User Manual

Search results

Summary of Contents for L64 Series

Reviews:

Related manuals for L64 Series

Brands by name

Popular brands