22
En
g
lis
h
SETTING UP YOUR TV
From this menu, you can set the RF input configuration.
a
Press
and
B
/
b
to highlight
Installation
icon.
b
Press
c
and
B
/
b
to select
Channel
Tuning
and
press
OK
.
c
Press
B
/
b
to select
Ant/Cable/Satellite
and
press
OK
.
d
Press
B
/
b
to select
Antenna
,
Cable
or
Satellite
.
e
Press
B
/
b
to highlight
Next
and press
OK
.
NOTE:
When you attempt to change the
Ant/
Cable/Satellite
setting, a warning message will
appear followed by PIN entry (if PIN has been set)
and a prompt for
Auto Tuning
.
f
When
Ant/Cable/Satellite
is set to
Cable
, the
following setting options will be provided in the
Auto Tuning
screen.
Press
B
/
b
to select an item and press
c
and
B
/
b
to select your desired option.
With the exception of
DTV Scan Type
and
DTV
Modulation
items, all of the following items will have 2
operating modes. The first is
Auto
where the values for
each item are preset by the system. The second is an
Input
mode where you will be able to enter a single value
in place of the pre-set value. If no channel is currently
tuned and the
Input
state is chosen, a system default
value will be shown. However, if a channel is currently
tuned when the item is accessed, the value of the current
channel will be displayed.
Operator Selection:
You can choose the Cable operator depending on the
Country
you set.
DTV Scan Type:
This item determines whether a
Quick Scan
or a
Full
Scan
will be executed.
The
Quick Scan
is a simplified version of the
Full Scan
that is designed to complete in less time.
DTV Start Frequency:
This sets the frequency from which the scan will begin.
DTV End Frequency:
This sets the frequency at which the scan will end.
DTV Modulation:
You can choose from six QAM modulation settings.
DTV Symbol Rate:
This is the baud rate (KS/s) of the scan.
DTV Network ID:
This is the Network ID to be utilized for the scan. This item
is greyed out when DTV Scan Type is set to “Full Scan”.
Ant/Cable/Satellite (if available)
Tuning Mode
DTV and ATV
Auto Tuning - Cable
Start Scan
DTV
Operator Selection
Others
Scan Type
Quick Scan
Start Frequency
Auto
End Frequency
Auto
Modulation
Auto
Symbol Rate
Auto
Network ID
Auto
