85
Engl
ish
CONTROLS AND FEATURES
When connecting a surround sound amplifier to the digital
audio output (Sony/Philips Digital Interface Format [S/
PDIF]), the following options can be selected or adjusted.
a
In the
Sound
menu, press
B
/
b
to select
Digital
Audio Output
and press
OK
.
b
Press
B
/
b
to select an option.
Audio Format
Press
OK
and
B
/
b
to select
PCM
or
Auto
.
PCM:
This mode outputs PCM format to the digital
audio output socket.
Auto:
This mode outputs Dolby Digital (if
available) or PCM to the digital audio output
socket.
Dolby Digital
S
Dolby Digital
Dolby Digital Plus
S
Dolby Digital
MPEG
S
PCM
HE-AAC
S
Dolby Digital
DTS
S
DTS
Audio Delay
Press
OK
and
B
/
b
to select
Auto
or
Manual
.
Auto:
This mode automatically adjusts the audio
timing to meet the video timing.
NOTE:
The time lag might be large
between the image and sound depending
on the connected equipment (amplifier
etc.). In that case, select
Manual
.
Manual:
You can manually adjust the audio signal
timing to meet the video signal timing.
Delay Adjustment
Press
OK
and
C
/
c
to adjust the audio signal
timing (0 – 250 ms) to meet the video signal timing.
NOTE:
• This feature is greyed out when
Audio Delay
is
in
Auto
.
• A time lag will occur when the video signal or
audio signal is changed. Adjust the timing
accordingly.
• When adjusting the timing, turn down the volume
of the AV equipment used as far as possible.
Depending on the equipment, noise etc. may
occur when the signal is changed.
• Depending on the connected equipment
(amplifier, etc.), adjustment may not be possible.
• When the optical digital output setting
(Auto
t
PCM) is changed, it may be necessary
to adjust the timing again.
• Do not use other than for audio output from the
AV amplifier, etc. (Malfunction may occur)
Digital Audio Output
< Sound
Sound Mode
Standard
Advanced Sound Settings
Sound Separation Effect
1
TruVolume
Off
Dynamic Range Control
On
Balance
0
Dual
Dual 1
Audio Level Offset
TV Speakers
On
Headphone Level
Audio Description
Digital Audio Output
