54
En
g
lis
h
CONTROLS AND FEATURES
Device Registration Setup
Once a User Name has completed authentication, it is
stored in the TV along with the password. The upper limit
for the number of Use Names that can be remembered is
20. You can delete User Names that are stored in the TV.
a
In the
Network
menu, press
B
/
b
to select
Network Device Setup
and press
OK
.
b
Press
B
/
b
to select
External Control Setup
and
press
OK
.
c
Press
B
/
b
to select
Apps Control Profile
and
press
OK
.
d
Press
B
/
b
to select
Device Registration Setup
and press
OK
.
The
Device Registration Setup
screen will
appear and the list of
Companion Device ID
managed by the TV will be displayed.
e
Press
B
/
b
to highlight the
Companion Device
ID
.
f
Press
B
/
b
to select the
Cancel, All
, or
Delete
buttons and press
OK
.
NOTE:
When re-registering a device which has been
deleted from the list, registration must be carried out
again.
This feature allows user to power on TV from external
device, and they can set a timer (Recording or Reminder)
from the outside of the room.
a
In the
Options
menu, press
C
/
c
to select
Power
Management
and press
OK
.
b
Press
B
/
b
to select
External Record Control
and press
c
and
B
/
b
to select
On
or
Off
.
NOTE:
Greyed out and set to
On
when
Location
is set to
Store
.
When the TV is connected to the home network via
Wireless LAN, with the
Companion Device Control
in
Enabled
, your TV can be turned on by control from Apps.
a
In the
Options
menu, press
B
/
b
to select
Power
Management
and press
OK
.
b
Press
B
/
b
to select
Companion Device
Control
and press
c
and
B
/
b
to select
On
.
NOTE:
• Depending on the device connected to the home
network, it may take a while for the TV to turn on.
• Depending on the device connected to the home
network, this feature may not work.
• If the unencrypted Wireless Setup is done, this feature
can not be used.
• The power consumption during Active Standby is more
than it during Normal Standby.
• After the change from Power On state to Active Standby,
there may be a period of several ten seconds which
does not receive the operation from a remote control or
external apparatus.
The TV can be configured as a media renderer.
When operating as a media renderer, the TV displays
content provided by a media server.
The selection of the media is done by media controller.
The TV can play photo, movie, or audio files when
operating as a media renderer.
a
In the
Network
menu, press
B
/
b
to select
Network Device Setup
and press
OK
.
b
Press
B
/
b
to select
Media Renderer
and press
c
and
B
/
b
to select
On
.
If request comes from media controller, prompt will appear
and the Media Renderer function will start.
To exit the Media Renderer:
Press
EXIT
.
NOTE:
You cannot use 3D function in operating as a
media renderer.
External Record Control
Companion Device Control
Media Renderer Setup
