Toshiba GRZ100-211B, Instruction Manual, Page: 234 / 463


233

6 F 2 S 0 8 3 4
4.2.7.5 Logic Circuit
It is possible to observe the binary signal level on the signals listed in Appendix B with monitoring
jacks A and B.
•
Press 5 (= Logic circuit) on the "Test" screen to display the "Logic circuit" screen.
/ 2 L o g i c c i r c u i t 1 / 2
T e r m A ( 0 - 0 7 1 ) ： 1
T e r m B ( 0 - 0 7 1 ) ： 4 8
3
3
•
Enter a signal number to be observed at monitoring jack A and press the ENTER key.
•
Enter the other signal number to be observed at monitoring jack B and press the ENTER key.
After completing the setting, the signals can be observed by the binary logic level at monitoring
jacks A and B or by the LEDs above the jacks.
On screens other than the above screen, observation with the monitoring jacks is disabled.
www
. ElectricalPartManuals
. com