Toshiba GRZ100-211B, Instruction Manual

Page: 205 / 463


204

6 F 2 S 0 8 3 4
When the screen shown below is displayed, perform setting as follows.
The number to the right of "Current No. = " shows the current setting.
/ 6 P r o t e c t i o n s c h e m e
1 = 3 Z O N E 2 = Z 1 - E X T 3 = P U P 4 = P O P 5 = U O P 6 = B O P
7 = P O P + D E F 8 = U O P + D E F 9 = B O P + D E F
C u r r e n t N o . = 2 S e l e c t N o . =
0 = P U P + D E F 1
•
Enter a number to the right of "Select No. = ". (Numbers other than those displayed cannot be
entered.)
•
Press the ENTER key to confirm the entry and the entered number blinks in reverse video.
•
After completing the setting on the screen, press the END key to return to the upper screen.
To correct the entered number, do the following:
•
If it is before pressing the ENTER key, press the CANCEL key and enter the new number.
•
If it is after pressing the ENTER key, enter the new number.
To enter numerical values
When the screen shown below is displayed, perform the setting as follows:
The number to the left of the cursor shows the current setting or default setting set at shipment. The
cursor can be moved to upper or lower lines within the screen by pressing the and keys. If
setting (change) is not required, skip the line with the and keys.
Z 1 S
θ
1 ( 0 - 4 5 ) : 0 d e g
Z 1 X S ( 0 . 0 1 - 5 0 . 0 0 ) : 0 . 0 1
Ω
/ 7 D i s t a n c e 1 / 3 6
Z 1 S ( 0 . 0 1 - 5 0 . 0 0 ) : 0 . 0 1 _
Ω
•
Move the cursor to a setting line.
•
Enter the numerical value.
•
Press the ENTER key to confirm the entry and the cursor will move to the next line below.
(If a numerical value outside the displayed range is entered, "Error: Out of range" appears on
the top line and the cursor remains on the line. Press the CANCEL key to clear the entry.)
•
After completing the setting on the screen, press the END key to return to the upper screen.
To correct the entered numerical value, do the following:
•
If it is before pressing the ENTER key, press the CANCEL key and enter the new
numerical value.
•
If it is after pressing the ENTER key, move the cursor to the correcting line by pressing the
and keys and enter the new numerical value.
Note: If the
CANCEL
key is pressed after any of the entry is confirmed by pressing the
ENTER
key, all the entries performed so far on the screen concerned are canceled and screen returns
to the upper one.
To enter a text string
Text strings are entered in the bracket on the "Plant name" or "Description" screen.
www
. ElectricalPartManuals
. com